Nearly a decade ago my wife and I bought our first house. It was a post-2008-crash foreclosure whose previous owner had gutted it of kitchen counters, fixtures, heating equipment and more on his way out the door. Being an experienced and overconfident tradesman, I set out to remodel our house. I contacted a general contractor that I had worked with, and an architect friend, for help. The general contractor and his subs would do the heavy lifting, with me handling the finish details. We developed a great plan that would have transformed that little house. Except when all the costs came in it amounted to more than my budget just to build the white box space. We still renovated our little house slowly over many years, but I never got over the sting of being that wrong about what the work I made a living from doing actually cost.

This failure led me to seek out information on estimating construction costs with the same vigor that I had for stairbuilding or cabinetmaking early in my career. Within a few years I was splitting my time between carpentry and estimating, and now my focus is solely on estimating—or as I see it, cost analysis. A big part of my job at TDS Custom Construction in Madison, Wis., is to give my employer an accurate analysis of what it will cost the company to produce a job. I applied this same logic to my own self-build.

All of the self-builders that I know fit into two groups: “My hands will touch every part of the project, forget the cost” or “My hands will touch only the parts that I have the time and money for, and I will manage the rest.” I fall squarely into the latter. My cost-analysis process started by dividing the labor costs up into the following categories: work that must be done by someone else (site work; plumbing; electrical; and other mechanical work required by local code to be done by a licensed professional), work that I am able to do and it is worth my time to do (my bread-and-butter carpentry work—framing; siding; interior finishes; windows and doors), and work that I am able to do but can be done more efficiently by someone else without a high cost penalty (foundation work; roofing; concrete flatwork; great-room drywall).

I often use an analogy about a dart board that I developed to explain my process for cost analysis. Darts one and two represent subcontractor costs and material cost, and you get to stand within arm’s reach of the dartboard when you throw them, so reach out and stick them in the bullseye. Dart three represents self-performed labor, and as long as the first two darts are in the bullseye, this dart only needs to hit the dartboard. This applies to self-building as well. Subcontractors will give you firm pricing if you give them accurate plans and your own material subtractions can be checked against that of a building material supplier. Those costs, if continuously managed throughout the project, will be accurate. Dart three in the case of the self-builder includes all the soft costs and general-condition items covered by general contractors like bathroom facilities, dumpsters, fasteners, and other miscellaneous materials used throughout the process, in addition to the building materials needed for your self-build work.

The method I used for my budgeting centered around viewing myself as both the general contractor and subcontractor. My cost spreadsheet is broken down into tabs that follow the building process from the ground up, utilizing a simplified cost code structure broken down into sub tasks or grouped based on a cost provided by a subcontractor for a scope of work. Here’s what that looks like:

Planning Costs

• Building Permit – Me
• Land Use Permit – Me
• Sanitary Sewer Permit – Required Sub

Site Work

• Installing the driveway – Sub
• Digging the foundation hole – Sub
• Installing the mound septic system – Required Sub
• Laying out the house on the lot – Me
• Well – Sub
• Electrical service install – local electric company

Foundation

• Laying out and forming the footings – Me (my sub was running behind so in the interest of time I took on this task)
• Pouring footing – Sub, plus me as an extra crew member
• Laying out, forming, and pouring the foundation walls – Sub, plus me as an extra crew member

Framing

• Self-performed 100% with subcontracted help for setting garage trusses.

Exterior Windows & Doors

• Self-performed install of Marvin Window & Door package and Therma-Tru door package

Roofing

• Asphalt-shingle roof – Sub

Porches & Decks

• Self-performed 100%

Electrical & Plumbing

• Required by my municipality to be done by a licensed professional.

HVAC

• In-floor radiant heat piping, HRV install – Me
• Mitsubishi mini split install – Required Sub

Insulation

• Foundation insulation, basement and garage-wall mineral wool, dense-pack cellulose – Me
• 4-in. coat of closed-cell spray foam on the roof system – Sub

Drywall

• Great room drywall – Sub
• All other drywall – Me

Interior Finishes

• All interior finishes; flooring, tile, paint, interior doors, and hardware – Me
• Site-built kitchen-cabinet package – Me
• Site-fabricated wood counters – Me

Accurate budgeting for any project centers on one’s ability to break the project down into parts that can be quantified individually. For a new-construction home with its many subcontractors and heavy material needs, this detailed budget breakdown provides a self-builder with a planning path for resource management. In a volatile material market like we currently have, the ability to do this type of detailed budgeting has been paramount in keeping my self-build project largely on it’s stingy $100 per sq. ft. budget.

Fine Homebuilding Recommended Products

Plate Level

A plate level allows to you plumb walls accurately because it registers off the plates without touching potentially warped or twisted studs. This one can reach the plates on 12-ft. tall walls.

Buy at Amazon

Original Speed Square

A Speed Square or rafter square can help you cut rafters, measure angles, and accurately guide your saw for straight and angled cuts. It's a must have.

Buy at Amazon

Smart String Line

String lines — sometimes called dry lines — are invaluable for straightening walls and a million other things. The reel makes it easy to stretch and wind the string.

Buy at Amazon