Open-Cell vs. Closed-Cell Foam Insulation
Learn in which applications it's best to go with closed-cell insulation.
To insulate 2×4 walls and 2×6 rafter bays, a spray-foam contractor suggested closed-cell foam since I don’t have a lot of framing depth and need to hit certain R-values. I thought open-cell foam was preferred when insulating roof decks and some walls. I’m using closed-cell in the basement, but is it also best upstairs, particularly against the roof deck?
– Kurt McInness, New Hartford, CT
Senior Editor Martin Holladay replies: In unvented roof assemblies, open-cell foam has been associated with damp roof sheathing and sheathing rot, so closed-cell foam is usually preferred for this application. Closed-cell foam has a higher R-value per inch and is vapor impermeable. It also will perform better below or above grade. Cold-climate builders using open-cell foam in an unvented roof assembly can reduce the chance of damp roof sheathing by installing drywall painted with vapor-retarder paint. Hot-climate builders need to heat the attic during the winter and cool it during the summer.
Photo courtesy of CertainTeed
Fine Homebuilding Recommended Products
Pretty Good House
Jigsaw
Flashing and Joist Tape
View Comments
Nice foam insertion. it would insulate heat. anyway, I have a bathroom that needs foam designs or marble. And someone recommended me this here's the site. I need more recommendations.
Our unvented cathedral ceiling is insulated with closed cell spay foam but not the soffits. How does soffit venting work without a ridge vent?